Running a Program
Bu içerik henüz dilinizde mevcut değil.
The program is written and the machine is set. These pages cover the AUTO screen and
everything you reach for while a program is running.
- The Run Screen: reading the
AUTOscreen. - Selecting & Loading a Program: choosing what the machine will run.
- Start, Feed Hold & Reset: the three keys that drive every program.
- Overrides & Run Options: the dials, and the switches you prove a program out with.
- Single Block: running a block at a time.
- Block Search: starting part way in.
- Retrace: winding the program back along the path it cut.
- Tool Life Management: changing a tool before it fails.
- Adaptive Feed Control: letting the feed follow the load on the spindle.
- Production Counts: what the machine records as it runs.
Where to go next
Section titled “Where to go next”- Setting Up a Job: what is done before the program starts.
- Diagnostics: when the machine will not start at all.