Machine Setup
Bu içerik henüz dilinizde mevcut değil.
These are the settings that decide what the machine is, rather than what it is cutting today. They are entered when the machine is built or commissioned, and a wrong value here does not announce itself: the machine runs, and every part comes out to the wrong size. The person cutting the part never opens these pages.
- Axes & Channels: the two places a machine’s settings live, and which belongs where.
- Gantry & Coupled Axes: driving one axis from another, and how the pair learns what square is.
- Protection Zones: declaring the obstacles inside the travel, so no move can reach them.
- Backlash Compensation: taking up lost motion at a reversal.
- Leadscrew Compensation: correcting an axis from a measured error table.
- Volumetric Compensation: correcting the machine as a solid rather than one axis at a time.
- Cycle Program Templates: the file that decides what a cycle program compiles to.
- External Program Selection: selecting a program by scanning a label.
- Multiple Channels: a machine that runs more than one program at once.
- Access Levels: who may change what, and how a level is entered.